ProSoftware Hub
Trezor Suite Desktop Application — Download & Setup Guide
Version: 26.9.2 | License: Free (Open Source) | Platform: Windows 10/11 x64 | SHA-256:
a989a0146e826cd3797e38cf29cbcf8870ec2cceea50541e3eee1f933ede0cb9
Overview
Trezor Suite is the official desktop companion application for Trezor hardware wallets (Model T, Model One, and Safe 3). The Windows 10/11 x64 client provides a comprehensive interface for managing cryptocurrency assets, with a strong emphasis on privacy, security, and self-sovereignty.
Trezor Suite supports Bitcoin, Ethereum, Litecoin, Dash, Zcash, and 1,000+ additional cryptocurrencies. The application communicates with the Trezor device via USB (WebUSB) for transaction signing. All private keys remain in the device’s secure microcontroller (STM32) with optional passphrase (BIP-39 25th word) for plausible deniability.
The desktop client features a built-in exchange (CoinSwitch, ChangeNOW, and native DEX integrations), Tor routing for enhanced privacy, CoinJoin for Bitcoin privacy, and advanced labeling with local encrypted storage. The application is built on Electron with a React frontend and Rust-based crypto backend.
Key Features
- Hardware Wallet Management — Initialize, restore, update firmware, and manage coins on Trezor Model T, Model One, and Safe 3 devices via USB.
- 1,000+ Asset Support — Manage Bitcoin, Ethereum, Litecoin, Dash, Zcash, and 995+ additional cryptocurrencies and tokens.
- Built-In Exchange — Swap between assets via CoinSwitch, ChangeNOW, and native DEX integrations with real-time rate quotes.
- Tor Routing — Route all traffic through the Tor network for enhanced privacy. No IP address leakage to third-party servers.
- CoinJoin (Bitcoin Privacy) — Participate in CoinJoin rounds to break the link between your Bitcoin transaction history and your identity.
- Labeling & Notes — Add encrypted labels to transactions, addresses, and accounts. Labels are stored locally and synced optionally via Dropbox.
- Passphrase (25th Word) — Create hidden wallets with BIP-39 passphrase for plausible deniability. Each passphrase generates a completely separate wallet.
- Firmware Verification — Automatic firmware authenticity verification using SatoshiLabs’ root certificate. Anti-rollback protection prevents downgrade attacks.
- U2F & FIDO2 — Use Trezor as a U2F/FIDO2 security key for two-factor authentication on supported services (Google, GitHub, Dropbox).
- Open Source & Audited — Fully open-source codebase (GPLv3) with public security audits by Cure53 and Trail of Bits.
System Requirements
| Component | Minimum | Recommended |
|---|---|---|
| OS | Windows 10 x64 (1903) | Windows 11 x64 (23H2) |
| Processor | Intel Core i3 / AMD Ryzen 3 | Intel Core i5 / AMD Ryzen 5 |
| RAM | 4 GB | 8 GB |
| Storage | 500 MB free disk space | 1 GB SSD |
| Display | 1280x720 | 1920x1080 |
| Network | Broadband (5 Mbps) | Broadband (25+ Mbps) |
| USB | USB 2.0 | USB 3.0 |
How to Download and Install
Step 1: Download the Installer
Click the Download badge above to visit the official Trezor download page (trezor.io/trezor-suite). Select Windows (.zip). The file is approximately 150 MB.
Step 2: Verify the Checksum
Get-FileHash .\trezor-suite-26.9.2-x64.zip -Algorithm SHA256
Compare with the hash listed at the top of this page.
Step 3: Run the Installer
Step 4: Complete Setup
- Connect your Trezor device via USB.
- Open Trezor Suite and click “Create New Wallet” or “Recover Wallet”.
- Follow the on-screen instructions to set up your device.
- Write down the 12/24-word recovery seed on paper. Never digitize it.
- Set a device PIN (optional but recommended).
- Add accounts: Accounts → Add Account → Select cryptocurrency.
Step 5: Post-Installation
- Enable “Passphrase” for hidden wallets: Settings → Device → Passphrase.
- Configure “Tor Routing”: Settings → Application → Tor.
- Set up “Labeling”: Settings → Application → Labeling → Enable.
- Enable “Auto-Lock” after 5 minutes: Settings → Application → Auto-lock.
Troubleshooting & FAQ
Issue: Trezor device not detected
Solution:
- Ensure the Trezor is connected directly (not via USB hub).
- Try a different USB port.
- Install Trezor Bridge (automatic prompt on first connection).
- Update Trezor firmware via Suite → Device → Firmware Update.
- For Model T: ensure the device is unlocked (PIN entered).
Issue: Firmware update fails
Solution:
- Ensure the Trezor is connected directly.
- Close all other applications.
- Try a different USB cable.
- If the device is bricked, use the bootloader mode: hold the button while connecting USB.
Issue: Tor routing not working
Solution:
- Ensure Tor is enabled: Settings → Application → Tor.
- Check that no firewall is blocking Tor connections.
- Try disabling and re-enabling Tor.
- Ensure the Tor binary is bundled with Trezor Suite (it is by default).
FAQ
Q: Is Trezor Suite free?
A: Yes. Trezor Suite is free and open-source (GPLv3). Network fees apply to transactions only.
Q: Can I use Trezor Suite without a Trezor device?
A: No. Trezor Suite requires a Trezor hardware wallet to function.
Q: Which Trezor devices are supported?
A: Trezor Model T, Trezor Model One, and Trezor Safe 3.
Q: Is my crypto stored in Trezor Suite?
A: No. Your crypto is on the blockchain. Your private keys are stored in the Trezor hardware wallet. Trezor Suite is only an interface.
Q: How do I recover my funds if I lose my Trezor?
A: Use your 12/24-word recovery seed on any new Trezor device or compatible BIP-39 wallet.